propane heaters for snowmobile trailers (2025)

Having two motors gives you more leveling control when setting up camp on uneven ground. 74" Bracket height when extended. 3 Universal mount weld stops let you choose how to orient the new legs. Total lift includes 17" of drop leg travel.; long x 5-3/4" wide 6-Year warranty Notes: Toggle switches are not IP-rated and should be installed away from propane tanks. If you are replacing Lippert or Reese landing gear, you will need use the

• Landing Gear
• 5th Wheel Camper
• Electric Jack
• 10001 lbs or More
• Weld-On
• 2 Jacks
• Ultra-Fab Products
• Steel

Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately). Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in

• Landing Gear
• 5th Wheel Camper
• Electric Jack
• 4001 - 5000 lbs
• Weld-On
• 2 Jacks
• Lippert
• Steel

Give your 5th-wheel trailer or camper some new legs! Upgraded motor works nearly twice as fast as the standard 80 RPM base model. Outer tubes are 29-1/2" long with 15-1/2" between weld ...
safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in soft ground Durable, sturdy steel construction Corrosion-resistant black powder coat finish

• Landing Gear
• 5th Wheel Camper
• Electric Jack
• 5001 - 6000 lbs
• Weld-On
• 2 Jacks
• Lippert
• Steel

Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately). Fuse-protected wires - won't interfere with your camper's electrical IP-rated - can be mounted safely near propane tanks Excellent stability and support Large, rectangular footplates minimize sinking in

• Landing Gear
• 5th Wheel Camper
• Electric Jack
• 4001 - 5000 lbs
• Weld-On
• 2 Jacks
• Lippert
• Steel

Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 4,500 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED ...
fading Round, zinc-plated steel footplate provides stability Emergency crank (included) allows you to manually operate jack if needed Easy bolt-on installation for A-frame trailers 3 Star washers included

• A-Frame Jack
• Pop Up Camper
• Teardrop Camper
• Travel Trailer
• Electric Jack
• 4001 - 5000 lbs
• Bolt-On
• 1 Jack
• Stromberg Carlson
• Steel

Heat your 12' long RV efficiently with this catalytic heater. The heater operates on low-pressure LP gas so you don't have to worry about electrical drain. Adjustable from 1,600 to 3,000 BTUs ...
Features: Catalytic heater acts as a primary or secondary heating source in your small RV Ideal for use in RVs up to 12' long Low-pressure LP gas operation means no electrical drain or battery

• Catalytic Heater
• Camco

Heat your 18' long RV efficiently with this catalytic heater. The heater operates on low-pressure LP gas so you don't have to worry about electrical drain. Adjustable from 3,200 to 6,000 BTUs ...
Features: Catalytic heater acts as a primary or secondary heating source in your mid-sized RV Ideal for use in RVs up to 18' long Safe for use at elevations up to 12,000' Low-pressure LP gas

• Catalytic Heater
• Camco

Heat your 23' long RV efficiently with this catalytic heater. The heater operates on low-pressure LP gas so you don't have to worry about electrical drain. Adjustable from 4,200 to 8,000 BTUs ...
Features: Catalytic heater acts as a primary or secondary heating source in your large RV Ideal for use in RVs up to 23' long Low-pressure LP gas operation means no electrical drain or battery

• Catalytic Heater
• Camco

Minimize chassis movement in your travel trailer with this jack stabilizer kit. Attach the telescoping tubes to your jacks and position them in place to brace your trailer frame. Includes 4 ...
travel trailers Bolts onto C-channel, I-beam, or H-beam trailer frames - no welding required Attaches to traditional stabilizer jacks, scissor jacks, and/or landing gear - adapters for electric and

• Stabilizer Jacks
• Travel Trailer
• Manual Jack
• Free-Standing
• 6 Jacks
• Lippert
• Steel

Folding RV stabilizer helps reduce bouncing and swaying in your parked trailer or RV when you enter or exit. Easily sets up with no tools. Adjusts to fit trailers with 14" to 28" of ...
Features: Stabilizer helps reduce bouncing and swaying in your parked RV or trailer Quick and easy setup requires no tools Tighten strap to pull legs in for increased height Loosen strap to spread

• Stabilizer Jacks
• 5th Wheel Camper
• RV Motorhome
• Travel Trailer
• Manual Jack
• Free-Standing
• 1 Jack
• Valterra
• Aluminum

Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity. lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked

• Leveling Blocks
• 5th Wheel Camper
• Pop Up Camper
• RV Motorhome
• Teardrop Camper
• Travel Trailer
• 5001 - 6000 lbs
• Free-Standing
• 4 Jacks
• Stromberg Carlson
• Plastic

Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack the pads to get 12-3/8" of height and a 3,500-lb load capacity. lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when stacked) Individual

• Leveling Blocks
• 5th Wheel Camper
• Pop Up Camper
• RV Motorhome
• Teardrop Camper
• Travel Trailer
• 5001 - 6000 lbs
• Free-Standing
• 2 Jacks
• Stromberg Carlson
• Plastic

Stabilize and level your travel or 5th-wheel trailer with this unique device. Designed to span the width of your rig for maximum support, the opposing sides of this stabilizer can be adjusted ...
Extra-large footplates help to minimize sinking and tilting Hand crank attaches for manual operation Sturdy steel construction Specs: Application: trailers and RVs with frames from 48" to 80" wide

• Stabilizer Jacks
• 5th Wheel Camper
• Travel Trailer
• Manual Jack
• 5001 - 6000 lbs
• Bolt-On
• 1 Jack
• Ultra-Fab Products
• Steel

Cross brace bars permanently attach to your scissor jacks to reduce your RV's movement while parked. Once installed, the braces will extend and retract along with your scissor jacks. Tension handle lets you adjust the bars to increase stability.Features: Cross braces permanently attach to your scissor jacks to reduce your RV's movement while parked Braces extend and retract with scissor jacks for easy setup and storage Included tension

• Scissor Jack
• 5th Wheel Camper
• Pop Up Camper
• RV Motorhome
• Teardrop Camper
• Travel Trailer
• Manual Jack
• Bolt-On
• 1 Jack
• MORryde
• Steel

Improve the stability of your parked and leveled RV with these base pads. 7" Tall pads fit under smaller units as well as units with a higher clearance. Stack 2 pads to get 12-3/8" of height and a 3,500-lb load capacity. lightweight polycarbonate - like bulletproof glass Side panel finger hole for easy carrying and retrieving Made in the USA Specs: Weight capacity: 6,000 lbs individually (3,500 lbs when 2 pads are stacked

• Leveling Blocks
• 5th Wheel Camper
• Pop Up Camper
• RV Motorhome
• Teardrop Camper
• Travel Trailer
• 5001 - 6000 lbs
• Free-Standing
• 6 Jacks
• Stromberg Carlson
• Plastic

These unique jacks extend from 11" to 17" and support up to 6,000 lbs each. Stackable design means that they take up less space when stored. For stabilizing only - do not use for lifting.Features: Stabilizers help support your small trailer or camper when it is parked Do not use for lifting Stackable design minimizes required storage space Simple setup Place beneath trailer and

• Stabilizer Jacks
• Pop Up Camper
• Teardrop Camper
• Travel Trailer
• Manual Jack
• 5001 - 6000 lbs
• Free-Standing
• 2 Jacks
• Ultra-Fab Products
• Aluminum

Replace the bricks and blocks normally needed when positioning your trailer jack with this base pad. 7" Tall pad works as a jack stand to support your trailer tongue's weight during storage.Features: Base pad works as a jack stand to provide a platform that supports the weight of your trailer tongue Minimizes amount of cranking needed to position jack Eliminates the need for blocks of

• Leveling Blocks
• 5th Wheel Camper
• Pop Up Camper
• RV Motorhome
• Teardrop Camper
• Travel Trailer
• 5001 - 6000 lbs
• Free-Standing
• 1 Jack
• Stromberg Carlson
• Plastic

This lightweight aluminum trailer is perfect for your boating adventure. Gunwale brackets hold your canoes hull side up. Heavy-duty straps secure your canoes to the trailer. Compatible with boats up ...
Features: Lightweight trailer is great for hauling 2 canoes Removable carriers let you use trailer to carry other accessories and gear Gunwale brackets hold canoes hull side up Included straps secure

• Crossbar Style
• Sports Trailer
• 250 lbs
• 6-1/2W x 11L Foot
• Aluminum
• Yakima
• 17 Feet Long

This adapter allows your cargo carrier to fold up and out of the way. With the adapter you will also increase the ground clearance between the carrier's platform and the ground to eliminate bottoming out. works with several other models. Cargo carrier (52018) shown in the folded position with the adapter. 1206 Surco Folding Basket Adapter for 2" Trailer Hitch Mounted Cargo Carriers

• Flat Carrier Parts
• Hitch Cargo Carrier
• Adapters
• Surco Products

Folding, 2-Arm 2-Bike Carrier for 1-1/4" Trailer Hitch Receivers Innovation meets durability to create this top-line bike rack. Two arms provide stability, and rotating, cushioned cradles allow

• Folding Rack
• Tilt-Away Rack
• Platform Rack
• 2 Bikes
• Fits 1-1/4 and 2 Inch Hitch
• Swagman

These unique jacks extend from 11" to 17" and support up to 6,000 lbs each. Stackable design means that they take up less space when stored. For stabilizing only - do not use for lifting.Features: Stabilizers help support your small trailer or camper when it is parked Do not use for lifting Stackable design minimizes required storage space Simple setup Place beneath trailer and

• Stabilizer Jacks
• Pop Up Camper
• Teardrop Camper
• Travel Trailer
• Manual Jack
• 5001 - 6000 lbs
• Free-Standing
• 4 Jacks
• Ultra-Fab Products
• Aluminum

Replaces the safety pin for the ramp on the Brophy trailer-hitch-mounted mobility scooter carrier (MSCR).Features: Replaces safety pin for the ramp on the Brophy trailer-hitch-mounted mobility scooter carrier (MSCR) Includes 1 safety pin

• Flat Carrier Parts
• Mobility Carrier Parts
• Pin and Clips
• Hitch Cargo Carrier
• Pins
• Brophy

Replacement Support Bar for Everthere X-300 or ETC-X12 Aluminum Cargo Carrier Fits 1-1/4" x 1-1/4" (Class II only) trailer hitches Class II hitches are rated at 3,500 lbs GTW, with 300 lbs TW

• Flat Carrier Parts
• Hitch Cargo Carrier
• Support Bar
• Everthere

It's never been easier to raise, level and stabilize your travel or 5th-wheel trailer. This electric stabilizer spans the width of your rig for maximum support and has dual, 12V motors that ...
support brackets For use on rear frame of pulled travel trailer Not recommended for use on front of motorized vehicle Dual, 12V motors operate independently of one another for simple, effective leveling

• Stabilizer Jacks
• 5th Wheel Camper
• Travel Trailer
• Electric Jack
• 5001 - 6000 lbs
• Bolt-On
• 1 Jack
• Ultra-Fab Products
• Steel